
Saw Cutting
Clean, burr-free cutoffs for tube, bar, and structural shapes — and the odd stock.
[ Overview ]
Saw cutting is the quiet backbone of every shop that works in bar, tube, and structural stock. Ours runs on two purpose-built CNC machines: a fully automatic PMI-20 24 CNC miter upcut saw for high-speed cut-to-length and miter work, and a Marvel 380A-PC3-60 vertical tilt-frame band saw for solid bar and large round stock up to 15″. Both are programmable, which means cut lists run unattended and miter angles are set automatically — no manual re-indexing, no angle drift. The result is a square, burr-free cutoff that's ready for the next operation, whether that's machining, welding, or shipping straight out.
[ At a Glance ]

[ The Machines ]
Equipment, in detail.
Every machine below is on our floor and ready to run — not a representative list, not a ceiling. This is what's cutting, welding, machining, and bending your parts.
Fully Automatic · Servo Miter
PMI-20 24 CNC Auto Miter Upcut Saw
High-speed cut-to-length and miter work for tube, bar, and structural shapes — runs unattended on programmable cut lists.
Blade
24 in · 7.5 HP · 2000 RPM
Miter Range
± 60° servo-controlled
Miter Capacity
7.87 H × 14.6 W in
Pusher
Automatic servo — cut-to-length
Feed Control
Air-over-oil
Operation
Fully automatic / programmable
PC3 Touchscreen · ±60° Tilt
Marvel 380A-PC3-60 Vertical Tilt-Frame Band Saw
Solid bar and large-round sawing up to 15″ — the machine for heavy stock the miter saw can't reach.
Round Capacity
Ø 15 in
Rect Capacity
15 × 20 in @ 0°
Control
PC3 touchscreen CNC
Blade
1-1/4 in · 5 HP
Speed Range
60–400 FPM variable
Miter
±60° tilt-frame
[ How It Runs ]
The process, step by step.
- 01Cut list reviewed — lengths, angles, and quantities programmed
- 02Stock loaded; servo pusher indexes to programmed length
- 03Miter angle set automatically by servo (±60°)
- 04Cut with air-over-oil feed control for square, burr-free face
- 05Parts offloaded and checked for length and squareness
[ Materials Handled ]
- Carbon and alloy steel bar
- Stainless bar and tube
- Aluminum bar and tube
- Structural shapes (angle, channel, tube)
- Brass, copper, and specialty stock
[ Typical Applications ]
- Cut-to-length tube and bar runs
- Miter-cut structural angle and channel
- Solid bar for machining stock
- Large-round sawing up to Ø 15 in
- Prototype and production cutoffs
- Saw-cut blanks ready for weld or machine
[ What's Included ]
- PMI-20 24 fully automatic CNC miter saw
- Marvel 380A-PC3-60 vertical tilt-frame band saw
- Servo-controlled ±60° powered miter rotation
- Automatic servo pusher — cut-to-length runs
- 24″ blade · 7.5 HP · 2000 RPM
- 15″ round band saw capacity
- Miter & angle cutting
- Tube, bar, structural & specialty stock
[ Other Capabilities ]
