CNC Machining
Milling, turning, and plastic routing for tight-tolerance parts — and the unusual.
[ Overview ]
CNC machining is where tolerances tighten and the geometry gets difficult. Our machining center covers three disciplines under one roof: precision milling, turning, and a dedicated plastic-routing department. Every job is programmed offline from a solid model or print, verified with in-process inspection, and run on machines sized for everything from small precision brackets to full-sheet plastic panels. Whether it's a one-off prototype, a short production run, or a specialty part in an exotic alloy, the same team that programmed it runs it — so the print and the process stay aligned part after part.
[ At a Glance ]
[ The Machines ]
Equipment, in detail.
Every machine below is on our floor and ready to run — not a representative list, not a ceiling. This is what's cutting, welding, machining, and bending your parts.
3-Axis VMC
CNC Vertical Mill
Tight-tolerance milling for prototypes through production in steel, stainless, aluminum, brass, and exotics.
Axes
3-axis (up to 3+2)
Work Envelope
40 × 20 × 20 in
Tolerance
± 0.0005 in
Materials
Steel · SS · Aluminum · Brass · Exotics
Programming
Offline CAM
Inspection
In-process probing
Turning Center
CNC Lathe
Precision turning for shafts, bushings, fittings, and round parts.
Chuck
Ø 16 in
Tolerance
± 0.0005 in
Best For
Shafts · Bushings · Fittings
Materials
Steel · SS · Aluminum · Brass
Operations
Turning · Facing · Boring · Threading
Programming
Offline CAM
CNC Plastic Router
Plastic Routing Department
A dedicated department for non-metal sheet — acrylic, polycarbonate, HDPE, Delrin, and engineered plastics up to 2″ thick.
Bed
60 × 120 in
Max Thickness
2.00 in
Materials
Acrylic · PC · HDPE · Delrin · ABS
Tooling
Plastic-specific O-flute
Edge Finish
Clean, chip-free
Best For
Panels · Guards · Signs · Fixtures
[ How It Runs ]
The process, step by step.
- 01Print or solid model received — toolpath programmed offline in CAM
- 02Material selected and fixtured; work coordinate set
- 03Roughing, semi-finishing, and finishing passes per tolerance callout
- 04Thread milling, tapping, chamfering, and counterboring as called out
- 05In-process inspection; first-article verified before run continues
[ Materials Handled ]
- Carbon and alloy steel
- Stainless steel
- Aluminum
- Brass, copper, bronze
- Exotic and tool alloys
- Acrylic, polycarbonate, HDPE, Delrin, ABS
[ Typical Applications ]
- Tight-tolerance brackets and housings
- Shafts, bushings, and fittings
- Plastic panels, guards, and signs
- Threaded and counterbored holes
- Prototype and first-article parts
- Short-run production in metal or plastic
[ What's Included ]
- Up to 3-axis precision milling & turning
- Plastic sheet routing up to 2″ thick
- Steel, stainless, aluminum, brass & exotics
- Thread milling, tapping & chamfering
- Offline CAM programming
- In-process inspection
[ Other Capabilities ]